Water Tool Back Flush Controller

Water Tool Sand Media Filter Back Flush Controller A Back Flush Controller specifically designed for back flushing multiple Sand Media Filters incorporating the following user friendly features.

  • Can control up to 96 separate back flush valves
  • Adjustable back flush duration from 15 to 180 seconds in 15 second increments or from 180 to 300 seconds in 30 second increments.
  • A dwell time between each filter back flush can be set from 15 to 180 seconds.
  • Flushing frequency can be set from 1 to 16 hours in 1 hour increments or 16 to 24 hours in 2 hour increments.
  • May initiate a manual flush cycle anytime with a push of a button.
  • The controller can initiate a back flush cycle with the interface of a pressure differential switch.
  • Controller will display the number of actual back flush cycles during a re-settable time period.
  • Utilizing “Logic Two Wire Technology” makes for a cost effective and efficient installation or system expansion.

All these easy to use features are in a simple Dial and Button format.

 

RainPro Corporation | P.O. Box 929 | 556 S. Mirage Ave | Lindsay, CA 93247 | Tel (559) 562-5975 Fax (559) 562-6626 | E-mail sales@hitproductscorp.com